Pages

Tuesday, September 4, 2012

Subway Art with the Silhouette Cameo and contact paper


Subway Art.  It's just not getting old with me.  Yet.  Ask me next year and we'll see if I edit this post.  ;)

I wanted a piece of that subway art in our home.  But I wanted it to have meaning.  So I choose to create memory subway art:  people, places, and times that hold a special place in my heart, as well as my family's.


But I didn't want the lettering to be vinyl.  I'm a paint girl and it had to be all about paint.

How in the world was I going to get those crisp, clean fonts to pop on my board?  I wasn't going to get the same look with hand painted lettering.  I knew I could use vinyl and then pull it off, revealing the paint underneath.  But that's kind of an expensive way to waste the vinyl and I'm all about saving where I can.  So, when I heard that people can use contact paper instead of vinyl, well giddy up sista, cause I'm on that train!  (I've never used that phrase before and promise not to use it again).

Okay, so after deciding on my "memories" and my fonts, I printed each one out on contact paper.  Here are the settings:  Media - vinyl; Speed - 8; Thickness - 3; Blade - 2. 


Just an FYI:  I am no expert at Silhouette.  I've hardly used the machine and I'm hoping to carve out some time to learn through tutorials.  But what I did learn is that the rollers and me, well, we're not friends.  If I don't make the rollers happy by making sure the paper is perfectly wide enough to grip it correctly, it never comes out right.  Ugh.  In the end, I felt like I had a lot of waste.  But, I did get a killer deal on discounted contact paper at Home Depot.  It turned out to be .17/linear foot.  Giddy up! (sorry, again)

After printing the lines, I cut them individually and peeled back the film to reveal the wording.   (Note:  use colored contact paper otherwise you won't see what the heck you are working with). 


Use your hook tool to get rid of the bits of contact paper that didn't come off.


When all the strips were ready, I lined them up in the correct order and got an idea for how big I needed my board. 


I cut my board and decided I wanted the lettering to be white, so I painted the board white.  Rolling paint kicks butt.


Now, I needed to transfer the lettering to the board.  Silhouette sells transfer paper.  But, remember, I'm cheap.  So, instead, I used clear contact paper.  I cut them to about the size of my strips and pushed down really good.

This shows putting a clear strip of contact paper over the contact paper lettering.

Next, I made sure to dry fit all the strips on the board.  After deciding where to place the first strip, I pulled the clear contact paper up transferring the lettering.  Go slow with this process so you don't miss any dots on the i's or punctuation.


Next, I pressed the first strip into place.  Use your handy-dandy YMCA membership card to press it on good.  Fine, use your credit card instead.


I did find the best method to pulling the lettering off the transfer paper (clear contact paper), was to pull hard, but slowly, while I pressing into the seam of the contact paper.  Actually worked like a charm.

Putting a lot of pressure on the YMCA card
I made sure to use a ruler to check all my measurements after and before each new strip.  I wanted even space on the left and right, as well as pretty evenly spaced between lines.  

When finished putting the words on, I was kind of in love.  At this point, I was so psyched with the way it was coming out.  But not psyched enough to leave the contact paper on. 

Looking good!
For the love of Pete, if you learn nothing else from this tutorial, learn this:  PAINT OVER THE LETTERS WITH YOUR BASE PAINT!!  This will seal the edges so the next color paint you put on will not seep under your lettering.  You want nice, crisp letters?!?  DO IT!  Okay, I think I made my point.

A few very light coats will work.
After this layer of paint has dried, add your top color.  Since I just did a whole living room re-do with grays, I decided on a slate gray color.  After the few coats of that bad boy had dried, it was time to take the letters off.  See, this is where the vinyl would be wasted.  I'm just using the contact paper letters as a template, if you will.  At .17/linear foot, I can sleep at night.


If you heeded my warning suggestion, your letters should be crisp and clean.  Don't they just look baaaa-u-ti-ful?


You can leave your sign here, but of course, I had to do a little distressing.  I used a very find sandpaper on my electric sander and went to town.



You can see the distressing on the edge of the sign.
 That's it.  I didn't even seal it as it's just going on my wall and I'm not expecting little hands to touch it.  Now it's a big part of my family wall vignette.  


I love signs and I love fonts and I'm fond of memories.  The perfect combination.

Debbie
Sharing with:

82 comments:

  1. I love how you created this. I really do enjoy the look of subway art.

    ReplyDelete
  2. I sent you an email, but it came back as incorrect. Just wanted you to know that you've been featured today, Friday, Sept. 7, 2012, on my weekly Welcome Wagon Friday post. You should be receiving visitors shortly. Welcome to our blogging neighborhood!
    Brenda @ Cozy Little House

    ReplyDelete
  3. This looks amazing!! I'm def going to give it a go this weekend!

    Jan @Door251

    ReplyDelete
  4. Debbie - What a great tutorial!! Very imformative and thorough. I have the machine still in the box and keep thinking I'll open it one day. LOL I'll definitely try this.

    Thanks,
    Judy

    ReplyDelete
  5. This is amazing! I'm so doing this! Thanks!

    ReplyDelete
  6. What a great sign! And I love your family wall!

    ReplyDelete
  7. Love this idea! You write the best tutorials! The contact paper idea was sheer brilliance!

    Have a great day rock stat!
    katianne

    ReplyDelete
  8. Thank you for your detailed instructions... I just got a Silhouette SD, so your settings help my inexperience... btw... if you peel both the waste/weeding as well as the transfer layer off at a 45 degree angle, while holding your card on top of the vinyl layer/transfer paper layer, close to the cut letters, things usually stay where they're supposed to... make sense? Thanks again for your tutorial... off to make a subway sign!

    ReplyDelete
  9. A first class and helping article that we can not but download on our database about art under construction. Bravo from Ronnie, Jacques, Erwin and Jhon of the Abe-x team of Artbooksexplorer, in short Abe-x.

    ReplyDelete
  10. Love your tutorial and suggestions! I have a new Cameo and the learning curve is steep! I've wasted alot of the vinyl that I ordered with my machine. It's good to know that you can cut the Contact (I mean, why not?). I have some chalkboard Contact paper I want to try for my classroom. I've used self-adhesive book cover vinyl for transfer paper. It's not as tacky as the original Contact paper and easier to remove when you have your lettering in place. It's also translucent.

    Thanks for the crafting inspiration.

    Donna W

    ReplyDelete
  11. After a day spent wasting some expensive Silhouette vinyl, in addition to some cheaper vinyl, I did a quick search for using the Silhouette Cameo with Contact paper, and I can't thank you enough for all of the information in this post. The settings (speed, thickness, blade) will be a lifesaver and your tip to use clear Contact paper as transfer tape- brilliant! I will be hitting the Home Depot on my way home tomorrow. I've got your site bookmarked, and hopefully, when I redo the project that was such an epic fail, your detailed instructions will lead to success! Thanks a bunch!

    ReplyDelete
  12. I tried to do this today with my Silhouette and contact paper, but each time it jammed in my machine. HELP! What is the magic secret.

    ReplyDelete
    Replies
    1. I had this issue, too, and since it's just contact paper, I put extra space at the "top" of my design so that the machine fed in 5" or so, and then worked on the design after that. May be too late to help you, but maybe not?

      Delete
    2. Very good point Melissa. You should definitely leave some room at the top AND bottom of your design. The rollers can play havoc on the paper, so give it enough room so the paper doesn't slip under it at all.

      Delete
  13. Thanks so much for this post! I am new to the silhouette cameo, but just knew it had to be less expensive (my way of saing I'm cheap!), and I'm so glad I came across your idea! and... Giddy Up sista is perfect!

    ReplyDelete
  14. Thanks so much for this post! I am new to the silhouette cameo, but just knew it had to be less expensive (my way of saing I'm cheap!), and I'm so glad I came across your idea! and... Giddy Up sista is perfect!

    ReplyDelete
  15. I've had your post pinned for a while until I finally got my machine. This was a great tutorial! I was doing my painting on a piece of weathered wood that I didn't want to lose the look of, so I painted over my stencil with a coat of Mod Podge, let it dry, painted over that and nice, crisp lines ... which I promptly distressed the heck out of. :) Thanks for the guidance!

    ReplyDelete
  16. Awesome tutorial, this was the best one yet. thank you for sharing step by step and detail pictures. You Rock! from Pam in Tennessee

    ReplyDelete
  17. Awesome!

    What size is your wood? I am having an issue finding the right wood for my signs. I love the wide pieces but I can't find them without having to put pieces together...

    ReplyDelete
  18. For the love of pete, I love this post! :) thanks for the awesome tips, I'm about to use my friends silhouette for the first time...until I can convince my husband I need one of my own! :)

    ReplyDelete
  19. Lemme you tell you one thing sista, I love me some con-tact paper. Thank you for the great tutorial and confirming the fact that I can use con-tact with my new cameo :)

    ReplyDelete
  20. Great, great tutorial. I'm always looking for a way to save money. Also thanks for the tip about painting the base color twice, once before you put the letters on, and again once the letters are on and before you put your contrasting color on top. I would've never thought to do that, but I can see what an impact it has!

    ReplyDelete
  21. Debbie, Have you grown weary of the subway art look yet? I'm only now jumping on the train and I see this post is from last September so hopefully this is still big! I love you idea. I just bought my Silhouette and was planning to make a family rules board for a friend as a house warming present. I didn't like how stark the vinyl letters turned out, so your contact paper suggestion is just perfect! Thank you. Excuse me I gotta go Giddy Up and get working on it!

    ReplyDelete
  22. Debbie, Love your subway art. I've been searching forever for ideas and this is close. My only concern is, I want to use pallet wood and wonder if I'll be able to smooth out the lettering onto rough wood. Or do you think I should just try another method, besides freehand lol? I have to buy my silhoutte cameo first though and try to navigate that. Love the gray canvas, thanks, Kat

    ReplyDelete
  23. Fantastic tutorial. Thanks for sharing your experience !

    ReplyDelete
  24. Great Tutorial Debbie!! I just got my Silhouette and was trying to use contact paper...how do you prevent the paper from sliding all around while in the cutting process? While my design was cutting (it was all font) the paper slid everywhere and the machine was cutting where there was no paper. The whole design was just a mess. Any suggestions?
    Thanks, Rosie

    ReplyDelete
  25. Great tutorial!! Thank you!! I have one question .. . how do you get your letters to stay on the backing? When I peel it back all the letters come, too. Maybe it is not cutting deep enough?

    ReplyDelete
  26. I love this!! Great detail and tips! Im heading for some contact paper now! Thank you + Merry Christmas!! :)

    ReplyDelete
  27. Wow, I am in love with your project! plus, you do a great job of explaining and showing us the steps and your writing is witty and clever! Thanks for the fun!

    ReplyDelete
  28. Great Tutorial love it and one Im going to try out on our new Silhouette

    ReplyDelete
  29. I love this tut!!! I hand paint some signs and it just never turns out crisp. I have a cricut......that I really don't know how to use but I think it can do about the same thing as a sillouette...right? Thanks again for sharing!!!0

    ReplyDelete
  30. I made one too. But my letters were much smaller (which made it very time consuming!) and I had bad materials. http://ravensbrookcreations.wordpress.com/2014/02/15/do-not-be-afraid-plaque/
    WRT bad materials: I used some colored contact paper. Now, I don't know how old this stuff was but it seemed good enough to me. However.....after my Silhouette cut it and I put the clear contact paper on the letters to transfer, the letter just would NOT come off. So I ended up using vinyl letters out of frustration. Transferring the top portion of my letters to the wood went pretty smoothly - I had to go slowly (especially with the colons) but I didn't have too much trouble. When I got to the lower half, I realized I was out of clear contact paper and went with that colored stuff I'd tried before. HUGE mistake. Spent literally *hours* peeling those letters off of there and getting them stuck in the wrong place and having them wiggle around on the wood because they wouldn't stick....ohhh very frustrating. However, I'm not deterred. Next time, I'll definitely throw the colored stuff away and work with brand new stuff and see if that works better! And, I'll make SURE I have clear contact paper to transfer with. So, all in all, it was a good learning lesson. And helped me understand a few more things about my Silhouette for sure! Thanks for the tutorial!

    ReplyDelete
  31. Hi - I think this is a great idea and I just tried it myself but my first attempt was a fail. :( I used a slate since I have a few on hand. I painted it white, then stuck my contact paper letters down. I then painted over the letters in white so the top color wouldn't bleed under the letters. I let that dry and then painted my top coat (black). I did a couple coats of the black and let it dry over night. So the next morning I used a pick to peel up the letters but they didn't come up cleanly at all. They pulled up a lot of the black paint. It looks like a big mess. Not sure if it because of the cheap craft paint I used...? Maybe because the letters were skinny and small? I'm not sure. I'm going to do some more internet research to see I can figure this out. Can you tell me what type of paint you used? Thanks for the tutorial. :) Linda

    ReplyDelete
    Replies
    1. Hi Linda, I think I replied to you via email but thought I would post an answer here for other to read. I have used different paints and found interior latex works the best. But if that is not what you have on hand, try to let the paint cure for about a week and that might work better.

      Delete
    2. Do you have any updates on this method since it has been a while? I want to try this but have heard from many that the letters do not come up after the multiple coats of paint. Your original tutorial is incredible with all of the details in the pictures. Thank you for your time and your blog.

      Delete
  32. did you let the paint dry completely before removing the letters or were they still wet?

    ReplyDelete
    Replies
    1. You know, sometimes I forgot about the contact paper and the paint dried but it pulled up just fine. Other times, not so much. Sometimes I think it has to do with the humidity, air temperature, kind of paint, wood, etc . . . basically it can be any variable. You will have the best luck if you remove the stencil while the paint is just a bit tacky.

      Delete
  33. I love this. Thanks for the tutorial! I have nominated you for the Liebster award over on my blog. Check out the details here: http://lifeinprintphotography.blogspot.com/

    ReplyDelete
  34. Thank you so much for this tutorial. I followed along, making my own sign, and it worked! I love the contact paper instead of the expensive "Silhouette" brand material that doesn't always work. I uploaded a pic to my pinterest in case you wanted to check out what I made with your wonderful help - http://www.pinterest.com/shellbarbalet/my-creations/ Thank you!!!!

    ReplyDelete
    Replies
    1. Michele, what type of contact paper did you use. The stuff I have is brand new and will not "unstick" from the clear contact paper when trying to transfer it to the wood. Thanks for the help.

      D'

      Delete
  35. Your project is fantastic. Thank you for the tutorial it was very well done and I found it very helpful. I was reluctant to start something using contact paper but your instructions helped to make it very easy. Can't thank you enough.

    ReplyDelete
  36. Just used your tutorial to make a personalized project for my daughter's college house. Biggest difficulty was that the letters stuck to the transfer paper instead of the canvas and were painstakingly hard to transfer evenly. A few of them even moved around a little when coating with white paint. At that point we decided that spray paint was the way to go for the main background color and the end result was decent - only one or two paint bleeds that were easily fixed with white paint on a toothpick.

    ReplyDelete
  37. Thanks so much! This is awesome!!! I don't have a silhouette yet, I'm still researching. I've always traced my letters,etc. and painted. My question is this: couldn't you just print (cut) your phrases in reverse? Then you wouldn't even need to transfer right? Or am I missing something?

    ReplyDelete
    Replies
    1. Interesting . . . . that's hard for me to wrap my head around. I might have to try it and see if it works.

      Delete
  38. Researching Silhouette functions and features... glad to know I can use contact paper because like you, I'm quite frugal as well. You did an AMAZING job with the sign! I too I love signs and I love fonts. Pinning and scratching vinyl and transfer paper off my Silhouette order. Thanks so much! Going to check out more of your blog.

    ReplyDelete
  39. What type of contact paper did you use. The stuff I have is brand new and will not "unstick" from the clear contact paper when trying to transfer it to the wood. Thanks for the help.

    ReplyDelete
    Replies
    1. When using brand new contact paper, stick it to your shirt to make it less sticky. It is easier to work with that way. Then keep using the same piece of transfer paper.

      Delete
    2. Sorry it took me FOREVER to get back to you D'. It's funny, because I have used different brands of shelf adhesive, but found Contact brand is the best. BUT, different prints of Contact brand have worked differently too. Maybe it's the way the stars have aligned that day, but now I just stick with plain white Contact paper and have few problems. Good tip Kristy Lee! I also reuse my clear contact paper when using as a transfer paper. I probably use it 6 times before it is no longer sticky enough to transfer. Also, you want to put a lot of pressure with the transfer onto the wood, but not a ton when transferring the stencil to the transfer paper. If you are pressing too hard, that would make it harder to release. Hope this helps!

      Delete
  40. Did you use a cutting mat? I have the 12 x 12 that came with the silhouette but do have a longer one that I bought to use with the Cricut.

    ReplyDelete
  41. I only use the mat when the piece is small enough, but I usually not end up using the mat and doing strips either 9" or 12" wide by as long as I need.

    ReplyDelete
  42. I don't know if this helps, but I saw on another board that someone used Mod Podge over the letters prior to painting to avoid the issue with paint seeping through!

    ReplyDelete
  43. Hi, I am making a sign for a wedding and the theme is the 1920s. I have searched the silhouette store but can't find a good one. The first one on your list is perfect. Do you by ANY chance remember the name of it? Thanks, Brandy

    ReplyDelete
  44. Hi, I am making a sign for a wedding and the theme is the 1920s. I have searched the silhouette store but can't find a good one. The first one on your list is perfect. Do you by ANY chance remember the name of it? Thanks, Brandy

    ReplyDelete
  45. Love it! Everything about it, the wording, the fonts, the colour choices, thx for sharing!

    ReplyDelete
  46. When you pull the letters off is there an outline or paint build up on the edges? I don't want mine to look like I used a stencil. I want the letters to look painted on. Hope that makes sense.

    ReplyDelete
  47. Love it! Everything about it, the wording, the fonts, the colour choices, thx for sharing! couples counseling

    ReplyDelete
  48. Hi! Love it! Any tips/suggestions on how to make the words/phrases aligned/lined up? Mine always end up crooked and ruin my project!

    ReplyDelete
  49. Just stopping in to let you know I'm using the paint tip on a project this weekend. Assuming mine turns out crisp and clean too, I will be linking back to you when I post my project. After all these years I never thought of that, duh!

    ReplyDelete
  50. Beautiful! And I love how you explained each step with photos. So, SO helpful!!! Thank you for the tip about painting over the letters with the base paint. Smart! I will be doing that from now on. :) :)

    ReplyDelete
  51. Just a lil tip.
    Mod podge works great to seal the contact paper before paint! ;) I like 2 coats!

    ReplyDelete
  52. Just a lil tip.
    Mod podge works great to seal the contact paper before paint! ;) I like 2 coats!

    ReplyDelete
  53. Was hoping to ask a question in regards to using the Silhouette vinyl. I just purchased a cameo and have tried to make some signs with the vinyl as stencils but when i remove it it leaves a sticky residue on my painted timber and i dont know how to stop it? I am using the premium vinyl, should I just be using the normal one??? Any help would be awesome. Thanks in advance, Juanita

    ReplyDelete
    Replies
    1. And any tips on how to get the residue off. I have paunted my wood with rustoleum 3x if that helps??? FYI eucalyptus oil doesn't work 😭😭😭

      Delete
  54. The dollar store sells contact paper! :) I didn't think about using the clear tape for transferring the letters, though! Thanks!

    ReplyDelete
  55. ughhhhhh, i tried this technique 3 different times (i wasted so much vinyl)prior to reading this tutorial and it never worked for me. I think I'm just to impatient and always in a rush. I will definitely try again using contact paper. Did you use wood, or canvas for the sign itself?

    ReplyDelete
  56. I love it....can you share what fonts you used? I've been looking through my Cricut and am frustrated that I can't come up with a nice combination! Yours looks perfect!

    ReplyDelete
  57. Hot diggity dog girl! THANK YOU! I never thought about painting a base coat FIRST after placing my letters down. What a revelation. For years, yes, I said, "YEARS" I have struggled with clean lines. I have always gone back over my signs with a fine brush and even a toothpick to fix those areas when the paint bled. I couldn't figure out what I was doing wrong. Now I feel like an idiot. Thank you again for sharing your great wisdom with us and making my sign making with less of a struggle! Whoo hooo! Kimberly

    ReplyDelete
  58. Great tutorial, thank you so much, really helpful.

    ReplyDelete
  59. What cut settings did you use. I always end up cutting all the way through the backing paper.

    ReplyDelete
  60. LOVE the idea of painting the base color over the contact paper 1st! I have so many projects from years past that would have helped with. But know I know!!

    ReplyDelete
  61. what type of wood did you use for this?

    ReplyDelete
  62. I make sure I do light coats of paint. If the paint layers get too thick the vinyl will not peel off cleanly!

    ReplyDelete
  63. I LOVE this!! Such a great idea with the contact paper. Thank you for sharing! I also read your story in the "My Story" section. I hope your family is doing well.

    ReplyDelete
  64. Girl, this is an awesome site. You do a great job with explaining steps. Thank you so much

    ReplyDelete
  65. I love this sign. What a great way to keep your memories right in front of you.

    ReplyDelete
  66. This is how I do everything. It does work like a charm. If you haven’t tried PressNSeal forctransferring, you need to. Very cheap and works perfectly!

    ReplyDelete

  67. You have discussed an interesting topic that everybody should know. Very well explained with examples. I have found a similar
    websitevinyl lettering visit the site to know more about sinking.

    ReplyDelete
  68. What cut settings did you use. I always end up cutting all the way through the backing paper.
    Themeyum

    ReplyDelete
  69. The blogs are really appreciable and one can trust the knowledge and information provided in the writing. The article you do produce on a weekly base really the best. thanks for this post and we also need more informative post like this
    Name Board Makers in Chennai

    ReplyDelete
  70. This blog is very helpful for the subway art with silhouette cameo. I am really happy.... if you are looking for a subway art with silhouette cameo ? kindly choose us shiva letter world. We are leadingLED Sign Board manufacturers in chennai. If you need any type of LED Sign board, kindly contact us www.ssesigns.com

    ReplyDelete